When handling any ceramic piece, it is important to be as gentle as possible. Even the slightest drop could lead to a broken vase, bowl, or another piece. Thankfully, there are several ways to fix a broken ceramic and make it look brand new again. You can glue a ceramic back together if you’re willing to try something different than the usual gluing strategies. These tricks will help you mend your broken ceramic in no time! Let’s see how you can glue ceramic back together!
How To Glue Ceramic Back Together
Clean the broken ceramic piece
Before you do any gluing, it is important to clean the broken ceramic piece. This is especially important if the piece has been damaged by something other than just being dropped. For instance, if there was a crack in the ceramic that wasn’t visible before, this would be a good time to clean it. The cleaner you can get your broken ceramic piece, the better.
Heat up the glue
To glue a ceramic back together, you will need some sort of glue to apply on top of it. You can use E6000 for instance or even superglue for more strength and durability. For most glues, you will want to heat up your glue with a heat gun or hair dryer before applying it on top of your ceramic. This is because hot glue doesn’t work well when cold and needs some time to work its magic!
Apply glue evenly
Once you’ve heated up your glue, you can apply it evenly on top of your broken ceramic piece. The best way to do this is to first apply the glue to a small part of the ceramic and then add more if needed. You will want to make sure that you cover all of the parts that need to be glued.
Allow it to dry
You will want to allow your glue to dry fully before moving on to the next step! While it is still hot, you can use a heat gun or hair dryer again and make sure that all of the parts are completely covered in glue.
After the glue has dried, you should clean off all of the excess glue from your ceramic piece once again. This is especially important if there was any excess glue left behind from when you applied too much! The cleaner your ceramic piece is, the easier it will be for you to get rid of any leftover pieces after gluing!
Polish and relight if necessary
If there are still some pieces that aren’t completely stuck together after applying heat and creating a bond, then you can use a polishing cloth or something similar for this purpose! You should also relight any pieces that have been left unglued due to excess heat from applying too much heat or too much time in between applications! Some clumps may remain but these can usually be easily removed with some gentle scrubbing with your fingers or with a microfiber cloth.
Use Rubber Bands To Repair Your Broken Ceramic
- The first thing you can do is to use rubber bands to repair your broken ceramic. There are two important things you must remember when doing this. First, make sure that the rubber band is not too tight; otherwise, it will not be able to hold the ceramic together. Second, make sure that you’re holding the piece with both hands so that it doesn’t fall apart from being tugged by the rubber band.
- The second way to glue ceramic back together is by using a glue gun. This method is a little bit different than using rubber bands because you won’t need to worry about the pressure on your hands and arms as much. If your ceramic piece has cracks in it, apply some glue to it and hold it in place until it dries completely.
- The last way to glue ceramic back together is by using super glue or epoxy glue. Super glue works best if there are no cracks in your piece and epoxy works better if there are cracks in your piece as well as if there are chips missing from the surface of your broken piece of ceramics.
- It is important to remember to use the glue sparingly and make sure that you’re holding the piece in a very stable position. It is also important to remember that the glue will not fix your ceramic piece completely, so you might want to put a little bit of extra caution when handling your broken ceramic.
Drying Glue For Mending Ceramics
- You can use Elmer’s glue. The glue is fast and easy to use, but it is not the best option for gluing ceramic back together. It has a tendency to dry out over time, so it’s important that you have plenty of time to let the glue dry before it hardens.
- You can use Super Glue. This super-strength adhesive will work on most ceramic pieces, but it also dries out quickly and needs some time to set up before you can start gluing.
- You can use a combination of both Elmer’s and Super Glue in the same project if you want your piece to look brand new again! This will give you the best of both worlds and save you from having two separate projects that are made with different glues!
- You can try using a hot glue gun instead of regular glue for your mending project! This will also work well on ceramic pieces, as long as they are heat resistant enough for hot glue guns (they should be).
- You can use a combination of all of the above in your project. For example, you can use Elmer’s glue, a hot glue gun, and either Super Glue or a glue stick to mend your ceramic piece.
Ceramics are delicate pieces and are prone to damage. Even the slightest drop can break your favorite ceramic piece. Thankfully, there are several ways to fix a broken ceramic and make it look brand new again. You can glue a ceramic back together if you’re willing to try something different than the usual gluing strategies. These tricks will help you mend your broken ceramic in no time! Let’s see how you can glue ceramic back together!