There’s nothing quite like having a large, high-definition TV in your living room. The problem is, not everyone has the space to accommodate a large stand for their large TV. If you’re trying to fit a bigger TV on a smaller stand, there are a few things you should consider. This article will explore the pros and cons of putting a bigger TV on a smaller stand, so you can make an informed decision about your home entertainment setup. With the right stand, you can enjoy all the benefits of having a large TV without having to worry about the added bulk. On the other hand, the wrong stand can lead to instability and accidents. Read on to find out the pros and cons of putting a bigger TV on a smaller stand.
Can You Put a Bigger Tv On A Smaller Stand?
Yes, you can put a bigger TV on a smaller TV stand. However, it’s important to consider the size of the stand and the weight of the TV before deciding if it’s a smart choice. The size of the stand is very important when considering whether a bigger TV can fit on it. This is because if the stand is too small, it won’t be able to support the weight of the TV. So, make sure that the stand is large enough to accommodate your TV.
How To Measure The TV Stand For A Secure Fit?
- In order to mount your TV, you’ll need to know how to measure your existing stand for a secure fit. The first step is to measure the width of the stand and then subtract the width of the TV. This will give you an idea of how much room you have left in your stand. Next, measure just below where your TV will sit and add 1 inch. This is your depth measurement, which will be used when mounting your TV on a shelf mount or wall mount. If you’re mounting it on a table or stand that doesn’t have any additional room, you can skip this step.
- If you’re mounting your TV on a table stand, you’ll have to use different mounting hardware than the ones used with wall mounts or shelf mounts. You’ll need to use the same mounting screws, but you’ll also need some special screws that will hold your TV in place. The most common type of table stand is the tabletop mount, and it requires a special bracket that goes onto your TV’s back and holds it in place. This bracket is designed for flat surfaces, so it can be more secure than other types of stands that might not work with your particular television. Here’s how to install one:
- Turn off your TV and unplug all cords from the back, then remove the back cover plate from the bottom of your television. Grab hold of the two tabs on each side of the bottom of your television, then lift them straight up while holding both sides in place.
- Once you’ve removed these plates, you’ll see the screws that hold your television in place. Remove these screws and set them aside.
- Take a look at your television and figure out what position you want to mount it in. If you’re mounting it on a stand, you’ll have to use different mounting hardware than the ones used with wall mounts or shelf mounts. You’ll need to use the same mounting screws, but you’ll also need some special screws that will hold your TV in place so make sure to get the right ones for your particular model.
- Take a look at the back of the TV and find where you will be attaching your bracket or table stand mount, then attach it using the screw provided with your product.
- Once everything is attached, slide in another piece of wood or another piece of furniture underneath so that there’s enough room for you to then screw down all of your mounting hardware into place using the included screws
The Different Types Of TV Stands
- If you’re considering putting a bigger TV on a smaller stand, it’s important to do your research ahead of time to find the right stand for your set. There are a variety of different TV stand types to choose from, each with its own set of pros and cons. Wall-Mounted TV Stands – Wall-mounted TV stands are built to be sturdy, providing a stable platform for your TV.
- Wall-mounted TV stands are typically designed to fit large sets, so they can be a great option for putting a bigger TV on a smaller stand. Wall-mounted stand models vary greatly in design, meaning you can easily find one that will fit in with your living room decor.
- Wall-mounted stands are also good for homes with limited space, as they can get your TV off the ground. Wall-mounted stands can be difficult to install, so it’s important to hire a professional if you’re not familiar with the process. Tabletop TV Stands – Tabletop TV stands are lightweight and easy to move, making them a good option for renters.
- A tabletop TV stand can also be a good option for putting a bigger TV on a smaller stand. Tabletop stands are designed to hold smaller TVs, so they don’t always provide the best support for larger sets. However, there are tabletop stand models that can hold larger TVs, so it’s important to do your research before you buy.
How To Choose The Right Stand For Your TV?
- When you’re shopping for a TV stand, it’s important to take note of the maximum weight capacity. Ideally, you should select a stand that can hold at least 10 pounds more than your TV.
- If you’re putting a bigger TV on a smaller stand, it’s also crucial to keep in mind how the TV’s weight will be distributed. It’s best to select a stand with a wide base, which will distribute the weight more evenly.
- A wide base not only adds stability but can also help prevent your TV from wobbling, which can be extremely annoying. A TV stand’s weight capacity is not the only thing to keep in mind when shopping for a new stand.
- You should also consider the TV’s mounting type, the width of the stand, and the space you have available for a new setup.
Tips For Installing A TV On A Smaller Stand
- Now that you’ve found the right stand for your TV, it’s time to install it. Installing a TV stand can be a bit intimidating, but it doesn’t have to be. You can hire a professional or use an online installation guide to help get the job done. Here are a few tips for installing a TV on a smaller stand.
- Make sure the stand is level. This will help reduce wobbling, which can be especially problematic with larger TVs.
- Place the TV on the stand before plugging it in. This will help you figure out where to plug in your TV’s wires. Cover your stand’s legs with felt pads to prevent scratches.
What Are The Pros Of Putting A Bigger TV On A Smaller Stand?
- If you have a large TV, you may feel that putting it on a smaller stand is the best solution. This can have a couple of different advantages over a large stand setup. For one, a smaller stand will usually take up less room in your room, leaving you with more space for comfortable seating.
- This can be crucial in smaller spaces where you may not have the luxury of a lot of legroom. Cluttered living rooms can make it difficult to enjoy your favorite shows.
- A smaller stand setup can help keep your living room looking tidy and organized, so you can enjoy your TV without distraction.
What Are The Cons Of Putting A Bigger TV On A Smaller Stand?
- While small stands can be advantageous in some situations, they can also be less stable than larger stand models.
- A small stand may not provide the same level of support for a larger TV as a bigger one, putting your set at risk of toppling over. A larger stand will be heavier, which is an important factor to consider.
- A sturdy stand will distribute the TV’s weight well and will not be easily knocked over. A heavier stand can also eat up more space in smaller rooms, leaving less room for seating. This is not to say that a larger stand is always more stable.
- There are plenty of sturdy, large stand models out there, so it’s important to do your research ahead of time.
Putting a bigger TV on a smaller stand can pose many challenges. However, with the right stand, you can enjoy all the benefits of a large TV while still fitting comfortably in your living room. Before you buy a stand, it’s important to take note of the weight capacity to ensure it can handle your TV’s weight. A wider base will help distribute the weight more evenly, keeping your TV stable and preventing it from wobbling.